All Automatic Waterer System Parts are interchangeable
The parts for all of Bar-Bar-A units are designed with simplicity in the formula. This means that parts are all accessible from the ground level and that it does not take an expert to replace a part. Please call us if you have questions on what part you may need.
Automatic Waterer System Parts from top to bottom for all automatic waterer system Units
Drinking Bowl- Cap covering the unit’s tube that also serves as the bowl from which the animal drinks.
Paddle – The lever inside the drinking bowl that the animal pushes to activate the water coming up from the valve.
Cable – The cable is attached to the paddle and down to the valve arm. This activates the main valve.
Fill and Drain Pipe- The long grey pipe that runs nearly the whole length of the inner unit. The water fills and exits using this pipe.
Insulator (for Insulated Units) – The black round disk that is located between the drinking bowl and valve assembly.
Union- The junction fitting found just under the round black insulator and just above the valve assembly. Its purpose is to connect the valve assembly with the fill and drain pipe. The union also allows access to the internal filter.
Internal Filter- Found inside the union. This filter collects debris draining from the drinking bowl. This filter should be cleaned or replaced on any sign of slow drainage.
4” Pipe – This 4 inch piece of pipe connects the union to the ‘T” which connects the valve assembly.
“T”- The T connects the 4” pipe to the drain pipe and to the main valve.
Valve Assembly – The metal platform on which the valve and water flow mechanisms rest.
Main Valve – This is the unit that brings water in from the waterline up to the drinking bowl and has a grey arm attached to it. The cable is attached to this grey arm.
Main Valve Washers – These are the washers inside the main valve that re attached to the grey arm.
Drain Valve – The small brass fitting at the end of the main valve assembly that directs the water flow in and out of the drinking bowl.
Red Handled Water Valve – Off and on valve for water coming into the system. Found on the coiled hose below the unit.